How to import Nethermancer Sepethrea

Introduction

This is an automatically generated tutorial. It will guide you through the process of importing the model Nethermancer Sepethrea of the bundle Nethermancer Sepethrea. Please note that all the screenshots in this tutorial were made using a Mac, however it should be no problem to interpret what is equivalent on a Windows or Linux machine.

Extract and Access

I am assuming that you have already downloaded the file Nethermancer Sepethrea.zip and know where it is located on your hard drive. The file is compressed as a zip archive. Most modern operating systems allow you to unzip the archive by double clicking it and dragging the contents out to the desktop (or any other place).

When you have extracted the archive, it should look like this:

Open World Editor and click Module -> Import Manager:

This is the Import Manager. From here you can add and remove custom files from your map file:

Importing Nethermancer Sepethrea.mdx

Now Click the "Import File" Button:

Next select 'Nethermancer Sepethrea.mdx' in the folder which you extracted from the zip archive:

The file has been properly added to the map archive:

Done, you have imported the file Nethermancer Sepethrea.mdx.

Importing Nethermancer Sepethrea_belt_diffuse.dds

Now Click the "Import File" Button:

Next select 'Nethermancer Sepethrea_belt_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Nethermancer Sepethrea_belt_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Nethermancer Sepethrea_belt_diffuse.dds.

Importing Nethermancer Sepethrea_hair_diffuse.dds

Now Click the "Import File" Button:

Next select 'Nethermancer Sepethrea_hair_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Nethermancer Sepethrea_hair_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Nethermancer Sepethrea_hair_diffuse.dds.

Importing Nethermancer Sepethrea_main_diffuse.dds

Now Click the "Import File" Button:

Next select 'Nethermancer Sepethrea_main_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Nethermancer Sepethrea_main_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Nethermancer Sepethrea_main_diffuse.dds.

Importing Nethermancer Sepethrea_main_emissive.dds

Now Click the "Import File" Button:

Next select 'Nethermancer Sepethrea_main_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Nethermancer Sepethrea_main_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Nethermancer Sepethrea_main_emissive.dds.

Importing Nethermancer Sepethrea_pauldrons_diffuse.dds

Now Click the "Import File" Button:

Next select 'Nethermancer Sepethrea_pauldrons_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Nethermancer Sepethrea_pauldrons_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Nethermancer Sepethrea_pauldrons_diffuse.dds.

Importing Nethermancer Sepethrea_skirt_diffuse.dds

Now Click the "Import File" Button:

Next select 'Nethermancer Sepethrea_skirt_diffuse.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Nethermancer Sepethrea_skirt_diffuse.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Nethermancer Sepethrea_skirt_diffuse.dds.

Importing Nethermancer Sepethrea_skirt_emissive.dds

Now Click the "Import File" Button:

Next select 'Nethermancer Sepethrea_skirt_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Nethermancer Sepethrea_skirt_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Nethermancer Sepethrea_skirt_emissive.dds.

Importing Nethermancer Sepethrea_skirt_normal.dds

Now Click the "Import File" Button:

Next select 'Nethermancer Sepethrea_skirt_normal.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Nethermancer Sepethrea_skirt_normal.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Nethermancer Sepethrea_skirt_normal.dds.

Importing Nethermancer Sepethrea_skirt_orm.dds

Now Click the "Import File" Button:

Next select 'Nethermancer Sepethrea_skirt_orm.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Nethermancer Sepethrea_skirt_orm.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Nethermancer Sepethrea_skirt_orm.dds.

Importing Nethermancer Sepethrea_weapon_emissive.dds

Now Click the "Import File" Button:

Next select 'Nethermancer Sepethrea_weapon_emissive.dds' in the folder which you extracted from the zip archive:

As you see, the field "Full Path" starts with something like "war3mapimported/". But most models do not look for their assets in that directory. The assets need to be in a specific location in order for the model to find them. Therefore, you will have to change the "Full Path" to what the model looks for. You can find the required paths in the readme.txt and also on this page.

Double-click the file Nethermancer Sepethrea_weapon_emissive.dds:

Tick the box "Use Custom Path" and type in the correct path:

The file has been properly added to the map archive:

Done, you have imported the file Nethermancer Sepethrea_weapon_emissive.dds.

You're done

You have now imported your model. Don't be afraid when you place the object and it appears to be a purple cube. Just close the map, re-open it and it will look fine in the World Editor.

If you did exactly as this guide told you and it did not work properly. Please make a thread in the Modeling & Animation Forum containing the following: